T-D Series Triple Rocker Wall Switch

SPECIFICATIONS

3 Gang vs 2 Gang Switch — Triple Control, One Wall Position

Seven Chroming Finishes — A Triple Switch That Matches Your Interior

Chroming 10A 3 Gang Wall Switch — Triple Rocker Switch with 7 Metallic Finishes

The TD315/TD325 is a chroming 10A 3 gang wall switch that provides three independent lighting controls in a single 81.5×120mm wall plate. This triple rocker switch replaces three separate single switches with one compact panel — maximum control density with minimum wall clutter. Each rocker controls its own lighting circuit completely independently: main ceiling lights on one rocker, under‑cabinet task lighting on the second, and island pendants or accent lighting on the third — all from one switch position. Available in 1 way for single‑location control of all three circuits, or 2 way for two‑location control of all three circuits. Each rocker uses high‑quality copper and silver touch points rated for 100,000 operation cycles. Available in seven metallic‑accent finishes matching the T‑D series aesthetic. Steel middle plate for structural rigidity across the wider three‑rocker assembly. Imported high‑transparent, high‑strength PC front panel. IEC 60669 certified with a 12‑year warranty.

We are a factory-direct manufacturer offering competitive wholesale pricing, OEM branding on any color PC panel, and a 12‑year warranty across the T-D series range.

Three Independent Rockers — Each Controls Its Own Circuit

This chroming three-gang light switch houses three completely independent switch mechanisms within one 81.5×120mm panel. Each rocker has its own copper and silver touch point mechanism rated for 100,000 operation cycles — pressing one rocker has no effect on the other two circuits. Wire gang 1 as 1 way for basic on/off, gang 2 as 2 way for staircase control, and gang 3 as 1 way for accent lighting — all from the same panel. The steel middle plate spans the full width of the three‑rocker assembly, preventing the flex that can cause rocker misalignment when individual gangs are used with different frequencies. The imported high‑transparent, high‑strength PC front panel provides a premium finish with the same chroming metallic accents as the rest of the T‑D series. IEC 60669 certified.

Matching the T-D Series — Triple Switch in the Same Chroming Finish

This white PC 3 gang switch with chroming details is part of the T‑D series, sharing the exact same 81.5×120mm dimensions, imported high‑transparent PC panel material, and seven chroming color finishes as T‑D series 1 gang switches, 2 gang switches, power sockets, and communication sockets. In a large open‑plan kitchen, you can have a TD315 3 gang switch controlling main lights, under‑cabinet lights, and island pendants — all from one wall plate that perfectly matches the surrounding T‑D power sockets and communication sockets. Available in all seven T‑D series chroming finishes for a consistent aesthetic across every wall plate.

Factory-Direct Supply for Wholesale & OEM Partners

Buyer’s Guide

3 Gang vs 2 Gang vs 1 Gang: Choosing the Right Switch Density for Every Room

A practical guide to specifying single, double, and triple rocker switches for residential and commercial lighting control installations.

TD315 (1 Way) vs TD325 (2 Way) — Which Circuit Type Do You Need?

The TD315 (1 way) controls three circuits, each from one location only — the standard setup for large kitchens and open‑plan living areas where three separate lighting groups are switched from the same wall position. The TD325 (2 way) allows each circuit to be controlled from two locations — the correct choice for large hallways, hotel corridors, and multi‑entrance rooms where three separate lighting circuits all need two‑point control. On pricing, the TD315 is the more economical choice for single‑location control.

3 Gang vs 2 Gang — When Do You Need Three Switches in One Panel?

A 3 gang switch is correct when three independent lighting circuits meet at one wall position. In a large kitchen: main ceiling lights on rocker one, under‑cabinet task lighting on rocker two, island pendants on rocker three. In an open‑plan living area: overhead lights, wall sconces, and accent lighting — all controlled from one switch position. A 2 gang switch handles two circuits; a 1 gang handles one. All three share the same 81.5×120mm dimensions and seven chroming finishes.

Finish Selection — Which Chroming Color for Your Room?

White + Chroming Gold: Classic warm accent. Black + Chroming Gun: Modern dramatic. Gray + Chroming Silver: Understated contemporary. Gold + Chroming Gold: Premium statement. Pure White, Black, and Gray options are also available without chroming for minimalist interiors.

Frequently Asked Questions

What is a 3 gang wall switch?

A 3 gang wall switch has three independent rockers on a single wall plate, each controlling its own separate lighting circuit. The TD315/TD325 is a chroming 10A 3 gang switch — three circuits operated from one compact 81.5×120mm panel. It replaces three single‑gang switches with one cleaner installation, saving significant wall space and matching the T‑D series aesthetic across all three circuits.

Can each rocker be wired differently on this 3 gang switch?

Yes, the three rockers on the TD315/TD325 operate completely independently. On the TD325 (2 way), you can wire gang 1 as 1 way for simple single‑location control, gang 2 as 2 way for two‑location staircase switching, and gang 3 as 1 way for accent lighting — all from the same 81.5×120mm panel. Each gang has its own clearly marked common, L1, and L2 terminals with dedicated copper and silver contacts rated for 100,000 cycles.

What is the difference between 2 gang and 3 gang switches?

A 2 gang switch controls two independent circuits from one wall plate. A 3 gang switch controls three. Both fit the standard 81.5×120mm T‑D series back box. Choose 3 gang when three separate lighting groups — such as main ceiling lights, under‑cabinet task lighting, and island pendants in a large kitchen — all meet at the same wall position. Choose 2 gang when two lighting groups share one position.

What chroming finishes is this 3 gang wall switch available in?

The TD315/TD325 is available in seven finishes matching the T‑D series palette: White, Black, Gray, White + Chroming Gold, Black + Chroming Gun, Gray + Chroming Silver, and Gold + Chroming Gold. The chroming variants feature a metallic border — Gold, Gun, or Silver — creating a visible design accent that matches T‑D series power sockets and other switches for a unified wall aesthetic.