Key Features & Typical Use
Width Is Cheaper Than Height
When it comes to height, the point of view regarding the wall-mounted equipment, connected to other components such as picture rails and shelves mostly refers to width and possibility of moving with the wall depending on the position. As a consequence of that, a plate measuring 80 x 73mm is created with this fact in mind – three mounting knobs are attached to the narrower plate.
Three Groups, One Position
The application of triplet light fixtures from a single point of view is commonplace in contemporary kitchens, living rooms and repurposed barns or factories wherein sufficient space cannot be illuminated simultaneously but only by certain zones. Hence, in place of three separate outlets, they are positioned in one place.
Converting a Large Volume Room
When making renovations in large rooms, it is necessary to change the lighting system from a single-circuit to a multiple-circuit system since the new needs may require zonation. Therefore, we need to install three circuits instead of one and one switch position instead of the existing one – a triple switch in the old box is probably the least effort-demanding way of doing it.
Identification on a Triple Plate
Having three switches on one panel makes recognizing the operation of each easier. The labeling of panels is possible thanks to OEM solutions, which allow for printing or engraving those labels to match the boundaries of the design, which is important in business interiors.
Specifications
| Series | EF EU standard series |
|---|---|
| Item Code | EF-011 |
| Description | 3 gang 1 way switch, slim panel |
| Panel Size | 80 x 73mm rectangular format |
| Rated Current / Voltage | 10A 250V~ (listed as 10AX on the EF sheet) |
| Gangs / Ways | 3 gang, all 1 way |
| Installation | Flush mounting |
| Plate Material | PC (polycarbonate) |
| Contacts | Red copper with silver alloy contact points |
| Supply Form | Finished product, or switch module + frame |
| Related Switches | EF-006 (2 gang 1 way), EF-007 (2 gang 2 way), EF-013 (door bell) |
| Packaging | Finished product packaging, or switch + frame packaging |
EF-011 – Zoning a Large Volume without Adding Wall Hardware
One circuit generally does not illuminate large rooms following a renovation. When a barn is refurbished or the living area has had several walls taken down or an area is done up like a workshop there is zoning provided for the area and each new grouping of lighting requires a switch in the area of use.
In this case, the importance lies in the format of the panel, since it is normally in sight and is often bordered by joinery, tiling or plaster that establishes the datum line. Being only 73mm in height allows the plate to stay below the height at which it interferes with these datum lines while allowing the three rockers to keep a comfortable distance across the 80mm width. In case zoning needs to be marked on the plate itself, plate printing can be used.
Factory-Direct OEM / ODM Manufacturer
We Manufacture, You Brand
Panel tooling in-house · PC moulding and copper contacts · OEM branding
- OEM branding – logo on the plate, custom carton and instruction sheet.
- ODM options – panel format, plate colour, plate printing and packaging format.
- Testing – function and electrical tests recorded for each production batch.
- MOQ – flexible per item; confirmed with the quotation for your configuration.
Buying Guide
- List the lighting groups the finished installation will have and confirm which are operated together.
- Check the existing position can accommodate a triple switch and measure the wall against the 80 x 73mm panel.
- Confirm whether any of the three circuits also needs a second control position.
- Decide whether plate printing or labelling is needed for identification.
- Approve a sample plate against the surrounding finishes and confirm quantities with our team.
How We Support Your Business
OEM / ODM
Custom housing colour, module mix, frame layout and retail packaging built on our standard EU wiring device platform — your logo on the plate, your carton on the pallet.
Custom moulding · Branded packaging · Private label
Wholesale
Factory-direct pricing with a flexible per-item MOQ, mixing modules, frames and finishes in one container for importers, wholesalers and retail chains.
Factory pricing · Mixed models · Container loading
Distributor Support
Account management, market-specific socket format advice and priority production slots for channel partners building a European wiring device range.
Account manager · Market advice · Priority lead times
Ready to Order the EF-011?
Let us know the number of lighting groups each designation will control, after which we’ll provide a quote for the EU specification slim panel three gang switch on factory pricing terms, with labels available through our OEM programme.
Contact Our Sales Team
Frequently Asked Questions
When does a position need a three gang switch?
In occasions where there is a possibility of simultaneously controlling three lighting groups from one single outlet and that happens in a kitchen where there are different types of lights such as ceiling lights, worktop lights and lights installed in the island, or in the case of an adapted open plan living area of the house, grouping the lighting systems means not having to install three different wall boxes.
Is a triple switch available in a 2 way version?
The EF series includes both single and double gang modules in single and double variations, in addition to a single three gang module. If at least one circuit requires two locations, a common way of resolving this problem is to design a product that combines two modules, such as a double two way and a single two way module.
How much wall space does a triple switch need?
In this case, a plate with dimensions of 80 x 73mm together with a wall box has been used which represents a comparable combination of a switch single gang format. As was the case in the single gang panel, width remains unchanged accordingly at that said same width level, although height is 73mm as opposed to the original height of 80mm of the same square format.
Can the three circuits be switched separately?
Yes. Each rocker is electrically independent so the integrity of the three circuits is assured even if they are working through the same plate.
Can labels be printed on the plate?
Yes. Printing on the plate is part of the OEM programme. Hence both rockers and plates can bear the required identification for the installation. Send us the wording and the layout for confirmation at the sample stage.
Will it fit an existing wall box in a refurbishment?
The switch is fitted to a normal wall box in the same manner as other products in the series. When replacing an existing one, you should measure the existing hole and fixing centers and compare the results to the 80 x 73mm plate before placing an order.
