DN71 Series 4 Gang Slim Wall Switch

SPECIFICATIONS

4 Gang vs 3 Gang — Maximum Control Density in One Slim Panel

British Standard 4 Gang Slim Wall Switch

The DN71307/DN71308 is a 4 gang slim switch according to British standards in the DN71 series, which boasts of the highest level of control which means that four separate lighting circuits can be controlled by one panel of 88×86mm in size. This is also a special baby skin printing switch, which comes with the signature DN71 surface coating, which is smooth and fingerprint resistant and feels like a baby’s skin against your hand. Each of the four rockers can operate independently, so you can control the main lights which are on the ceiling and other types of lighting such as under-cabinet lighting, island pendants, and accent or cove lighting. You can buy it in 2 versions which are either 1 way which can control four circuits only from a single point, and 2 way for controlling them from 2 different points. Red copper and Φ3.0×25mm silver alloy contacts ensure reliability of switching per any of the 4 gang switches. Two types of middle plates are also available — steel and semi steel for getting the structural strength required to support the biggest rocker of the DN71 series.

As a factory-direct manufacturer, we provide customers with competitive wholesale prices and OEM branding on any panel material of the DN71 series. In addition, our products are backed by a 12-year warranty

Four Independent Rockers — Maximum Control, One Compact Panel

This four-gang switch features independently-operating switch mechanisms within an 88×86mm panel which shows the highest density in the range of DN71. Each of its rockers has a red copper contact system with a Φ3.0×25 mm silver alloy point, ensuring that by pressing one rocker, other switches are not affected. It is possible to wire gang 1 for the 1-way switch for standard on/off, gang 2 – for 2-way switch for staircase control, gang 3 – for 1-way accent lighting, and gang 4 – for another two-way wiring from the same switch panel with the same baby skin printing. A plate made of steel or steel with a plastic coating is installed in the middle of the switch. Being the widest panel in the series, this plate is important for preventing flex and ensuring that rockers remain in working order when different gangs of switches are operating at different frequencies. The imported transparent high-strength polycarbonate plastic base also contributes to the rigidity of the construction. This panel is certified for the IEC in countries that require compliance with British standards.

Matching the DN71 Series — 4 Gang Slim Switch

The DN71 series features this baby skin printing wall switch with the same dimensions of 88×86mm, three different kinds of high-end materials used to construct the panels, four color finishes, and a baby skin printing surface treatment as all DN71 switches of various types. The DN71307 4-gang switch can be used to switch on main lighting, and task lighting and decorative lighting in the kitchen or in public places with this switch mounted on a wall plate matching every other switch or socket of the DN71 series in the interior. Four different colors of panel materials available: White, Gold, Gray, and Black.

Factory-Direct Supply for Wholesale & OEM Partners

Buyer’s Guide

4 Gang vs 3 Gang vs 2 Gang: Choosing the Highest Switch Density for Complex Lighting Layouts

A practical guide to specifying quad, triple, and dual rocker baby skin printing switches for maximum control in British standard installations.

DN71307 (1 Way) vs DN71308 (2 Way) — Which Circuit Type Do You Need?

The DN71307 model, known as one-way, can manage four circuits at 1 set position – ideal for big kitchens, sizeable commercial areas and open plan spaces with multiple partition spaces – while DN71308 i.e. two-way, has the capacity to control all the four circuits from two places at the same time, making it apt for hotel corridors, more than enough sizeable hallways or business places that require two-way control of 4 varying circuits. In terms of price, the DN71307 model is considered more economical in controlling at just one location.

4 Gang vs 3 Gang — When Do You Need Four Switches in One Panel?

A 4 gang switch is defined as the switching unit where four individual lighting circuits converge in one wall location. As seen in a typically spacious kitchen: main ceiling lights on rocker one; under‑cabinet task lighting on rocker two; island pendants on rocker three; and cove or accent lighting on rocker four. If dealing with a conventional meeting room at the workplace, there is a need for switching overhead lights, wall scone lights; presentation lighting and ambience lighting through only one switch. As for three circuits, there is a 3 gang; as for two circuits, there is a 2 gang. As to their sizes, they match in 88×86mm dimensions having a baby skin printing finish.

Panel Material Selection — PC, Glass, or Aluminum?

PC with baby skin printing: The economical with a luxurious silk feel — the most preferred option for both home and commercial use. Tempered Glass with baby skin print: Elegant and smooth, the first label in luxury residential and boutique hotel products. Aluminum in brushed finish with baby skin print: Metallic industrial design combined with unexpectedly pleasant to the touch structure — the best option for contemporary commercial facilities. All three products have baby skin printing and come with a warranty of 12 years.

Frequently Asked Questions

What is a 4 gang slim wall switch?

A 4 gang slimline wall switch has four separate rockers on one slim wall plate, each controlling its own lighting circuit. The DN71307/DN71308 is a British standard 4 gang baby skin printing switch, which controls four circuits from a single panel that is 88×86mm in size and has an ultra-smooth and fingerprint-resistant finish. This switch does away with the need for four different single gang switches and saves space while retaining the appearance of the DN71 range.

Can each rocker be wired differently on this 4 gang switch?

Yes, it is true that the four switch groups on the DN71307/DN71308 are entirely independent. On the DN71308, which has switching groups 1 and 3 wired as a one-way switch and switching groups 2 and 4 wired as a two-way switch, one may use the same panel for simple single-switch or two-switch staircase lighting. Each switch group has its own labeled Common, L1 and L2 terminals, along with specific copper and silver components.

What panel materials is this 4 gang baby skin printing switch available in?

The DN71 series 4 gang slim wall switch comes with three alternatives for its front panel, which have received the baby skin printing procedure: high-transparent PC (durable and cost-effective with a soft feel), tempered glass (smooth and glossy, resistant to fingerprints), and brushed aluminum (constructed from metals and has soft touch finish). All of these materials have the same dimensional specifications of 88×86mm, similar internal contacts made of red copper and silver, as well as a warranty period of 12 years.