Key Features & Typical Use
Sized for One Small Group
Dimmers are specified by load, and the most common mistake is fitting the largest one available to a circuit that does not need it. At 300W this module suits a single small lighting group — the lamps in one bedroom, a bathroom circuit, a small living area — which is the majority of residential dimming points.
Load Is the Selection Criterion
The figure to check before ordering is the total load of the lamps on the circuit against the module’s stated maximum of 300W. Lamp technology and minimum load requirements vary, so the project specification and the lamp manufacturer’s information should be confirmed rather than assumed when a circuit uses unusual or very low wattage fittings.
Same Plate as Everything Else
Because the dimmer is an 80 x 80mm module, it fits the same frames as the switches and sockets in the range. A bedroom plate can therefore carry a dimmer for the main light and a switch for a second circuit in one frame, keeping the wall consistent instead of introducing a different product family.
Three Loads, One Family
The series covers 300W, 500W and 1000W in the same module size and finish, so a project can specify the load that each circuit needs without introducing a second dimmer design. That also keeps spare parts and retail stock simple: one housing, one frame system, three ratings.
Specifications
| Series | E10 EU standard series |
|---|---|
| Item Code | E10-0333 |
| Description | Dimmer module, 300W maximum load |
| Maximum Load | 300W |
| Module Size | 80 x 80mm |
| Installation | Flush mounting |
| Housing Material | PC (polycarbonate) |
| Frame Options | 1 to 5 gang, horizontal or vertical (E10-044 to E10-048) |
| Related Modules | E10-033 (500W dimmer), E10-0330 (1000W dimmer) |
| Packaging | Finished product packaging, or module + frame packaging |
E10-0333 – The Right Dimmer Load for a Single Circuit
Dimming specifications go wrong in one of two ways: a dimmer too small for the load, which fails or overheats, or one far larger than the circuit needs, which costs more and may not control low loads well. The 300W module is the answer for the ordinary case — one lighting group, a bedroom or a bathroom or a small living area — and it sits in the same plate family as the rest of the installation.
Selection is a matter of adding up the lamps on the circuit and checking that total against the module rating, then confirming the lamp technology used against the project specification. Where a circuit carries more or larger groups, the same series offers the 500W (E10-033) and 1000W (E10-0330) modules in an identical housing, so the plate design and frame system do not change with the rating.
Factory-Direct OEM / ODM Manufacturer
We Manufacture, You Brand
EU module tooling in-house · PC moulding and dimmer assembly · OEM branding
- OEM branding – logo on the plate, custom carton and instruction sheet.
- ODM options – load rating, control type, plate colour and packaging format.
- Testing – function checked for each production batch.
- MOQ – flexible per item; confirmed with the quotation for your configuration.
Buying Guide
- List the circuits to be dimmed and total the lamp load on each one.
- Match each circuit to the module rating: 300W (this module), 500W (E10-033) or 1000W (E10-0330).
- Confirm the lamp technology and any minimum load requirement against the project specification.
- Decide how many module positions are needed and whether the dimmer shares a frame with switches.
- Choose the supply format: finished plates, or modules plus frames for local assembly.
- Approve a sample module and confirm quantities with our team.
How We Support Your Business
OEM / ODM
Custom housing colour, module mix, frame layout and retail packaging built on our standard EU wiring device platform — your logo on the plate, your carton on the pallet.
Custom moulding · Branded packaging · Private label
Wholesale
Factory-direct pricing with a flexible per-item MOQ, mixing modules, frames and finishes in one container for importers, wholesalers and retail chains.
Factory pricing · Mixed models · Container loading
Distributor Support
Account management, market-specific socket format advice and priority production slots for channel partners building a European wiring device range.
Account manager · Market advice · Priority lead times
Ready to Order the E10-0333?
Tell us the lamp load on each circuit to be dimmed and the quantity required and we will quote the EU standard 300W dimmer module on factory terms, with the 500W and 1000W versions available.
Contact Our Sales Team
Frequently Asked Questions
How do I choose between the 300W, 500W and 1000W dimmer modules?
Add up the total load of the lamps on the circuit and select the module whose maximum load exceeds it. The 300W version suits single small groups such as a bedroom or bathroom circuit; the 500W and 1000W versions cover larger or combined groups. All three are the same 80 x 80mm module.
Can several lamps be dimmed from one module?
Yes, provided the combined load of the lamps on that circuit stays within the module’s maximum rating. The circuit arrangement — how many fittings and which lamps — is a design decision, and the dimmer rating should be chosen after that total is known.
Does the dimmer fit the same frames as the switches?
Yes. The module is 80 x 80mm and fits E10 frames from one to five gang in either orientation, so a dimmer can share a plate with switch, socket or data modules. That is how a bedroom plate can carry a dimmed main light and a switched second circuit.
What should I check before fitting a dimmer on a lighting circuit?
Confirm the total lamp load against the module rating, and check the lamp technology and any minimum load requirement against the project specification. Unusual lamp types and very low wattage fittings are the cases where this matters most, and we will confirm the suitable module if you send us the details.
Is it supplied as a module or as a finished plate?
The dimmer is a module, supplied for use in E10 frames as either finished plates or modules plus frames. The packaging format is chosen with the order, in the same way as the switch and socket modules.
Can we order it branded and mixed with other modules?
Yes. Logo printing on the plate is available with custom carton and instruction sheet, and dimmer, switch, socket and data modules are commonly mixed in one shipment. MOQ is confirmed per item with the quotation.
