Key Features & Typical Use
The Change Refurbishment Clients Actually Ask For
House rewiring from the very beginning does not occur so often; when it comes to adding switching to the opposite side of a room, it does happen every time. A two-way switch handles the matter by using a bit of extra wiring between the two points instead of a new switched circuit back. It is what makes the renovation affordable and feasible even inside already lived-in locations.
Geometry of the New Position
The placement of the new switch has been chosen for a spot that did not initially take it into account: beside a doorframe, at the end of a corridor or on a low wall next to a built-in wardrobe. In this case, we can see the advantage of a panel of size 80 x 73 millimeters: this shorter plate can be fitted into narrow openings and tight corners where a square plate would simply get stuck.
Old and New Plates in One Room
A two way pair typically indicates an additional switch next to an existing switch and making sure the same look and feel of both switches remains the same is part of the job. The plates are made of the same material and finish as found in the EF series, so the new installation looks like it was part of the original setup.
Pairing Arithmetic
Two way switches are always supplied in pairs for the circuit, meaning two switches for every lighting circuit, and two positions which control the circuit. However, when the run requires a third position or a fourth position the intermediate module EF-003 should be utilized instead of providing more two way switches.
Specifications
| Series | EF EU standard series |
|---|---|
| Item Code | EF-002 |
| Description | 1 gang 2 way switch, slim panel |
| Panel Size | 80 x 73mm rectangular format |
| Rated Current / Voltage | 10A 250V~ (listed as 10AX on the EF sheet) |
| Wiring | Two way — installed in pairs, three terminals per switch |
| Installation | Flush mounting |
| Plate Material | PC (polycarbonate) |
| Contacts | Red copper with silver alloy contact points |
| Supply Form | Finished product, or switch module + frame |
| Related Switches | EF-001 (1 way), EF-003 (intermediate), EF-007 (2 gang 2 way) |
| Packaging | Finished product packaging, or switch + frame packaging |
EF-002 – Converting Single Way Circuits during Refurbishment
Most commonly, the process of arguing for the inclusion of a second switch occurs years after the occupation of the area, which leaves the upper stair lights without a switch below, thus requiring one to walk all the way by the kitchen to turn on the lights in the stairwell while the switch is located right next to the door. The process of electrically converting is very simple as it consists of installing the wire which will serve for switching the circuit. The tricky part remains the infrastructure installation of the final components, including the switch plate and the switch itself.
The challenge faced by the EF series is that during the renovation project, the switch must be installed on an already existing finish in which the cavity can be narrower than that required by a normal flat plate. The presence of the 80 x 73mm flat panel eliminates this concern, and because the switch can be produced in the same design, the user is happy about the unity in the area.
Factory-Direct OEM / ODM Manufacturer
We Manufacture, You Brand
Panel tooling in-house · PC moulding and copper contacts · OEM branding
- OEM branding – logo on the plate, custom carton and instruction sheet.
- ODM options – panel format, plate colour, module mix and packaging format.
- Testing – function and electrical tests recorded for each production batch.
- MOQ – flexible per item; confirmed with the quotation for your configuration.
Buying Guide
- Survey the circuit that needs a second control position and check the cable route between the two points.
- Confirm the plate size the new position allows, checking the opening and fixing centres.
- Order the two way switches as a pair for each converted circuit.
- Consider the intermediate module EF-003 where a third or fourth control position is also wanted.
- Approve a sample plate against the existing finishes before the order is placed.
- Confirm quantities and configuration with our team.
How We Support Your Business
OEM / ODM
Custom housing colour, module mix, frame layout and retail packaging built on our standard EU wiring device platform — your logo on the plate, your carton on the pallet.
Custom moulding · Branded packaging · Private label
Wholesale
Factory-direct pricing with a flexible per-item MOQ, mixing modules, frames and finishes in one container for importers, wholesalers and retail chains.
Factory pricing · Mixed models · Container loading
Distributor Support
Account management, market-specific socket format advice and priority production slots for channel partners building a European wiring device range.
Account manager · Market advice · Priority lead times
Ready to Order the EF-002?
Just let us know how many circuits we are converting to two way control and we will provide a quotation for the slim design two way switch according to EU regulations and the associated modules at every position required.
Contact Our Sales Team
Frequently Asked Questions
Can an existing single way circuit be converted to two way?
Correct. This modification is among the commonest refurbishing alterations that can be found. The system consists of basically 2 switches and one wire between two ends of the circuit, instead of returning power to the distribution board.
How many switches does a two way circuit need?
Two: there is one EF-002 switch for each position in the circuit panel. Since EF-002 switches are ordered in pairs for each circuit, therefore, when four circuits are converted, a total of eight switches are needed. Buying just one switch will be useful as a spare.
Will the new plate match the switches already installed?
The EF series utilizes PC plates in identical finishes as all the products in the series hence, it is possible to match the new positions to those that already exist. If the existing installation uses a different format of panels, the new switch can still be provided in the format as permissible according to the existing position.
What if the circuit needs control from three positions?
The circuit is made up of 2 way switches located at both ends with the introduction of EF-003 in every other position in the line. No intermediate switches can be used independently; consequently, the two way pairs will always have to be used.
Is 10A suitable for the lighting on the circuit?
Rated at 10 A and 250 V, this switch is classified as 10 AX. This makes it appropriate for typical lighting circuits designed for home and commercial applications. If a circuit has large numbers of LED drivers or unusual in rush current, please provide further details, and we can confirm the module required.
Can EF and square panel switches be mixed in one order?
Indeed, both formats utilize the identical switch mechanisms and are manufactured with the same equipment so that in the refurbishment order both rectangular panels for new locations and square ones for replacements can be ordered.
