A10-016/017 6 Gang Switch – 1 Way & 2 Way

SPECIFICATIONS

Six Rockers – Operate Separately – Configurable as Single Pole or 3-Way

Each rocker on this 6 gang switch operates completely independently. Wire gangs 1, 2, and 4 as 1 way (Single Pole) for basic on/off, and gangs 3, 5, and 6 as 2 way (3-Way) for multi-location control — all from the same 75×120mm panel. Each rocker uses the same red copper with silver alloy contact mechanism for consistent long‑term performance across all six circuits, with no derating and no shared mechanisms.

6 Gang Switch — Six Circuits, One UK Standard Panel

The A10-016/017 is a six gang light switch that has six separate light circuit controllers within one 75×120mm PC panel. Instead of having six separate switches in six different back boxes, this six gang light switch allows you to have all of the switches in one small plate. Each switch can be configured either as 1 way (Single Pole) or 2 way (Three Way) allowing you to mix and match switch configurations over all six gangs. Rated at 10A or 16A/250V per gang, built with red copper and silver alloy contacts, IEC certified, and backed by a 12‑year warranty. Three middle plate options let you balance rigidity and cost for any project.

We are a factory-direct manufacturer offering competitively priced products at wholesale prices, OEM branding on the PC panel, and a 12-year warranty available for anything in the A10 range.

PC Panel & Three Middle Plate Options — Customized to Your Specifications

This six-gang light switch uses a high‑transparency PC front panel over a rigid middle plate — available in iron (maximum rigidity for heavy‑use commercial areas), plastic (lightweight and cost-effective for standard residential), or iron with plastic (balanced option combining strength with reduced weight). On a six-rocker panel, the middle plate plays a critical role in preventing flex across the wider assembly. The 75×120mm dimensions fit standard UK wall boxes. Available in White, Gold, Gray, and Black, matching other A10 series products for a unified wall aesthetic.

Factory-Direct Supply for Wholesale & OEM Partners

Buyer’s Guide

Choosing the Right 6 Gang Switch for Your Project

A practical guide covering model selection, middle plate options, wiring, and application scenarios for high‑density multi-gang installations.

A10-016 vs A10-017 — Which Model Do You Need?

The A10-016 (1 way) is a 6 gang switch where each of the six circuits is controlled from one location only — ideal for large kitchens and open-plan areas where multiple independent lighting zones are switched from a single wall position. The A10-017 (2 way / 3‑Way) adds two‑location control for each circuit, making it suitable for hotel corridors, large hallways, and commercial spaces where multiple circuits need multi-point control. On pricing, the A10-016 is the more economical option.

Why Choose 6 Gang Over Multiple Smaller Switches?

A single six gang light switch replaces six individual single-gang switches and their six separate back boxes — saving significant wall space and installation labor. In high‑density residential projects and commercial fit‑outs, this consolidation means fewer wall openings to cut, fewer back boxes to install, and a cleaner finished wall with one plate instead of six. For electricians, wiring six circuits into one back box is more efficient than running cable to six separate locations.

Middle Plate Selection & Wiring

For a 6 gang panel, the iron middle plate is strongly recommended — six rockers across a wide assembly benefit from maximum rigidity to prevent panel flex over time. For each gang, bring the incoming live to common, bridge across all six commons, and connect each load wire to its respective L1 terminal. With six circuits in one box, neat cable management is critical. For 2 way circuits, add traveler wires to L1 and L2 on the corresponding gang.

Frequently Asked Questions

What is a 6 gang switch?

A 6 gang switch is a single wall plate with six independent rockers, each controlling its own separate lighting circuit. The A10-016/017 is a 6 gang switch — six switches in one 75×120mm PC panel that fits a standard UK wall box. It is used in large rooms where multiple independent lighting zones need control from one location, such as kitchens with main lights, under‑cabinet, island pendants, accent, cove, and task lighting.

Do they make a 6 gang electrical box?

Yes, 6 gang electrical boxes are available, though they are less common than 1-4 gang boxes at typical retail outlets. The A10-016/017 6 gang switch is designed to fit a standard UK wall box profile — the compact internal mechanism houses six independent switches within a single 75×120mm panel footprint. For new construction or renovation, a deep back box is recommended to provide adequate wiring space for six circuits.

Is there a 6-way switch?

“6-way switch” can refer to two different products. In UK terminology, a 6-way switch is the same as a 6 gang switch — six rockers on one plate, each controlling its own circuit. This is the A10-016/017. In North American terminology, “6-way” sometimes refers to a single circuit controlled from six or more locations, which requires a combination of 3-way and 4-way switches. The A10-017 2 way version can be part of such a setup, but for multi-location control of one circuit, intermediate switches are also needed.

Is there a 5 gang switch?

Yes, 5 gang switches exist though they are less common than 4 gang and 6 gang configurations. The A10 series includes multiple gang options to cover various project requirements. If a 5 gang configuration is needed for your project, contact our sales team — we can discuss availability or recommend the nearest standard configuration from our range of multi-gang wall switches.